Tim Holtz Distress® Salvaged Patina Etcetera Tag

Follow along as Paula Cheney shows you how to create this beautiful and elegant Etcetera Tag using Tim Holtz Distress® products and featuring the newest color in the line, Salvaged Patina.

Instructions

Tim_Holtz_Distress_Etcetera_Tag_Step1
Step1: Gather project supplies. You will need a Mini Etcetera Tag, Distress White Heavystock (Distress Watercolor Paper will also work), Stampers Anonymous Baroque Stamp, Distress Embossing Ink and White Embossing Powder. 
Tim_Holtz_Distress_Etcetera_Tag_Step2.jpg
 
Step 2: Cut a piece of Distress White Heavystock to cover the Mini Etcetera Tag.  Stamp the Baroque stamp with Distress Embossing Ink, then pour Embossing Powder over the ink.  Dump the excess powder from the tag onto a sheet of scrap paper and return to the jar. 
Tim_Holtz_Distress_Etcetera_Tag_Step3

Step 3: Repeat the stamping on the other side of the paper.  Be careful to avoid touching the powder from the first stamping. 
Tim_Holtz_Distress_Etcetera_Tag_Step4.jpg
Step 4: Melt the Embossing Powder with an embossing gun. 
Tim_Holtz_Distress_Etcetera_Tag_Step5.jpg
Step 5: Spray Craft Sheet with Salvaged Patina, Kitsch Flamingo, and Wild Honey (use sparingly). Spray ink with water from the Distress Sprayer. 
Tim_Holtz_Distress_Etcetera_Tag_Step6.jpg
Step 6: Press the embossed paper into the ink.  Flip onto a paper towel. 

Tim_Holtz_Distress_Etcetera_Tag_Step7.jpg
Step 7: Begin to dry with a Heat Tool. Work back and forth into the ink as many times as needed to add more layers of color.  You can pounce off any excess with a paper towel. 
Tim_Holtz_Distress_Etcetera_Tag_Step8.jpg
Step 8: The finished paper will have patches of all of the colors used, making the white embossing stand out. 
Tim_Holtz_Distress_Etcetera_Tag_Step9.jpg
Step 9: Adhere dry embossed paper to the Mini Etcetera Tag with Collage Medium.  Place on a self-healing mat board (right side down) and use a cutting knife to trim away any excess paper.  Let dry. 
Tim_Holtz_Distress_Etcetera_Tag_Step10.jpg
Step 10: With a light touch, brush Collage Medium over surface to seal.  Sealing the surface allows you to use the Distress Crayon in the next step.  Dry with a Heat It Tool.
 
Tim_Holtz_Distress_Etcetera_Tag_Step11.jpg
Step 11: Scribble Walnut Stain Distress Crayon on the edges and over the white embossing.  Use a damp finger to rub the Distress Crayon over the surface.  Pounce with a wet wipe to take away any harsh lines or fingerprints. 
Tim_Holtz_Distress_Etcetera_Tag_Step12.jpg
Step 12: Cut out the hole at the top of the tag and add the reinforcer with Collage Medium. 
Tim_Holtz_Distress_Etcetera_Tag_Step13.jpg
Step 13: Tint a Found Relative card using Distress Crayons and a Detail Water Brush.  Scribble the crayon onto the glass mat or Craft Sheet.  Dip the tip of the Water Brush into a puddle of water.  Dab off on a paper towel.  Pick up one color of crayon and dot over the flowers.  Add one color at a time. Tap your finger over the top of the flower bunch to remove some of the crayon (its a simple trick that helps to mottle the colors). For the background, scribble the crayon around the edges then rub with a damp finger till the color almost disappears. 
Tim_Holtz_Distress_Etcetera_Tag_Step14.jpg
Step 14: Add the Found Relative card to a Curio Frame. 
Tim_Holtz_Distress_Etcetera_Tag_Step15.jpg
Step 15: Adhere the Curio Frame to the tag on the right side.  Add a sentiment from the Metallic Sticker Book. 
Tim_Holtz_Distress_Etcetera_Tag_Step16.jpg
Step 16: Color Distress Watercolor paper with Distress Ink to use for the die cuts in the next step. I created a card for each of these 4 color combinations: 
Salvaged Patina + Antique Linen 
Kitsch Flamingo + Antique Linen 
Fossilized Amber + Antique Linen 
Salvaged Patina + Bundled Sage (not shown) 
 
Tim_Holtz_Distress_Etcetera_Tag_Step17.jpg
Step 17: Use the colored papers and the Sizzix Bloom Thinlits to create flowers and leaves. Colorize dies take a bit more time to put together but the result is worth it.  So many levels of color.  Once the flowers and leaves are complete, lightly ink the edges with your favorite brown Distress Ink. 
 
Tim_Holtz_Distress_Etcetera_Tag_Step18.jpg
Step 18: Add some shredded cheesecloth beside the Curio Frame.  Add a double stack of foam squares under the pink flower to raise it from the tag surface.  Continue to add the other flowers and leaves with Collage Medium and Adhesive Foam to create a 3D effect. 
 
Tim_Holtz_Distress_Etcetera_Tag_Step19.jpg
Step 19: Color seam binding ribbon with Salvaged Patina and dry with a heat tool.  Spray Walnut Stain onto Craft Sheet and spray with water to dilute.  Lightly toss the Salvaged Patina ribbon into the Walnut Stain to pick up just a bit of the brown.  Dry with a Heat Tool. 
 
Tim_Holtz_Distress_Etcetera_Tag_Step20.jpg
Step 20: Fold ribbon in half and tie a bow.  Add Collage Medium on the knot and push bow under the raised pink flower.  Let dry. 

 

 

Related Posts

Creating Bold Journal Pages with Dina Wakley Gloss by Laura Dame
September 26, 2024
Creating Bold Journal Pages with Dina Wakley Gloss by Laura Dame

Read More

Dina Wakley Media Coaster Circle Journal Page by Laura Dame
September 09, 2024
Dina Wakley Media Coaster Circle Journal Page by Laura Dame

Get inspired by Laura Dame's vibrant circular journal page using the latest Dina Wakley Media Coaster stencils! She layers...

Read More